Advanced Seals & Gaskets Ltd - Solid Rubber

+44 (0)1384 252555 (t) | (e) | +44 (0)1384 252373 (f)

Advanced Seals and Gaskets Limited
Advanced Seals & Gaskets Ltd - Solid Rubber

Click on this image to enter the selected page of the Advanced Seals and Gaskets website

rubber, self adhesive rubber, self adhesive rubber seals, self adhesive rubber seal, self adhesive rubber gaskets, self adhesive rubber gasket, rubber seals, rubber seal, rubber gaskets, rubber gasket

Solid Rubber is a common phrase which encompasses a whole family of materials. These include Commercial rubber, Neoprene rubber, Natural rubber, Nitrile rubber, EPDM rubber, Viton rubber, Shot-blast rubber and Silicone rubber. Solid Rubber Formats All of the above material grades are manufactured in roll form at pre-manufactured thicknesses. Most of the Solid Rubbers are manufactured in continuous rolls with sizes of 1.4mtrs wide x 10 mtrs long with the exception of Viton and silicone which are manufactured in rolls 1.2 mtrs x 10 mtrs. We can supply in continuous rolls or supply part rolls (subject to grade chosen and may be subject to cutting charges) Thickness of Solid Rubber The following thicknesses are available as standard: 0.5mm,0.8mm,1mm,1.5mm,2mm,2.5mm,3mm,4.5mm,6mm,8mm,10mm,12mm,15mm,20mm and 25mm. Other thicknesses are available upon request but may be subject to minimum order quantity. Stock of Solid Rubber Here at Advanced Seals and Gaskets Ltd we stock all of the above grades and manufacture a wide range of products from the raw materials including : Rubber washers Rubber gaskets Rubber strip Rubber sheet Rubber pads Rubber fabrications Rubber mouldings Rubber extrusions Solid Rubber Washers Solid Rubber Washers Self adhesive backing Any of the above items can be supplied with a self-adhesive backing if preferred. Special grades of Solid Rubber Solid Rubber is also available in grades such as BS2752 Neoprene, BS2751 Nitrile, BS1154 Natural and WRAS or WRC approved EPDM. These grades may be subject to minimum order quantity. Shore hardness We are able to offer Solid Rubber in various shore hardness from 40 shore to 80 shore with 40 shore being the softest. Please see the chart below for a pictorial example on shore hardness. shore hardness chart Quality of our Solid Rubber The products and services provided by Advanced Seals and Gaskets Ltd are continuously quality controlled at ALL stages of processing. To help ensure product quality at all times we run a fully documented Quality Management System which is certified to ISO 9001. Help with Solid Rubber If you would like to speak to a representative to discuss your specific application or requirements please call our sales office direct on 01384 469100, alternatively you can send an E-mail. Simply click on the link and forward us your details along with your question and we will contact you immediately. Solid Rubber Specification Sheets Advanced Seals and Gaskets Ltd Tel: 01384 252555 Email: ISO 9001 The information presented is based on the present level of knowledge and experience. All information and recommendations contained in this publication are to the best of our knowledge. Since the conditions of use are beyond our control, users must satisfy themselves that products are suitable for the intended processes and applications.

Other ASG web sites can be found here:
Material Specification Sheets